Inverted Vantage
Formerly Unknown Target
- Joined
- Jun 19, 2008
- Messages
- 1,116
What do you guys think of my model? I tried to make it as absolutely accurate as possible as rapidly as possible using the subdivision modeling method. My client will be using a 3D CNC machine (of which I know no details of as of yet) to mill it out of foam (the type of foam is to me completely unknown). The model is made at full size, and then I will scale it down to 1/4th scale for the CNC machine to make the molds to create a scale R/C aircraft.
I used 2D and 3D references; a screenshot of my workspace is provided below;
Dimensions turned on for this picture, I don't usually model with them on. Dimensions are:
9.7945 m x 11.3451 m x 2.8493
Here's a WIP for said client;
Here are a shot of my references, most of them client-provided;
I used 2D and 3D references; a screenshot of my workspace is provided below;
Dimensions turned on for this picture, I don't usually model with them on. Dimensions are:
9.7945 m x 11.3451 m x 2.8493
Here's a WIP for said client;
Here are a shot of my references, most of them client-provided;
Last edited: