• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Propellor Bolts

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Markproa

Well-Known Member
Supporting Member
Joined
Feb 9, 2017
Messages
199
Location
Bellingen, NSW. Australia.
My propellor mounting flange and prop and crush plate take 10mm bolts. The flange isn't threaded so requires bolts and nuts. Is it ok to use 8.8 high tensile bolts and nyloc nuts or should I use castellated nuts and drill the bolt for tie wire? Should the bolt head face back or forward?
 
Back
Top