Ranger Workshop

Discussion in 'Workshop Tips and Secrets / Tools' started by erkki67, Jun 16, 2019.

Help Support HomeBuiltAirplanes Forum by donating:

  1. Jun 16, 2019 #1

    erkki67

    erkki67

    erkki67

    Well-Known Member

    Joined:
    Feb 18, 2010
    Messages:
    1,367
    Likes Received:
    134
    Location:
    Romont / Fribourg / Switzerland
    the Ranger is already a Star, now this star is on its way to be completed by Fritz.

    Workingspace is in some cases very limited as will be the storing space or Hangar for this critter.

    How far could a 20‘ or a 40‘ freight container being used as hangar and workshop for the creation and storage of our Ranger.

    For our US friend, just remind that only the 20 and 40‘ Containers are available worldwide, others are limited to their respective countries.

    How should such a container workshop being organized, knowing that many parts should be cnc manufactured?
     
  2. Jun 16, 2019 #2

    erkki67

    erkki67

    erkki67

    Well-Known Member

    Joined:
    Feb 18, 2010
    Messages:
    1,367
    Likes Received:
    134
    Location:
    Romont / Fribourg / Switzerland
    DA7A53CF-0E51-423B-8827-058401BD42C8.jpeg BC36C625-D90D-469E-850B-23C821DA752D.jpeg

    It’s not the Ranger stored in a container, but it’s cousin with the low wing layout.

    But the thing is, how to create and store the Fritz creations in 1 40‘ seafreight Container or in 2, 20‘ ones?!
     

Share This Page

arrow_white