schooner
New Member
I need three landing gear actuators for an RV 4.
The gear kit I bought did not include the cylinders.
The plans show the stroke to be 4.75" for the mains and 3.5" for the tail.
The two mains have a bore of 1.25" and the tail about .75".
Any ideas where I could get them would be greatly appreciated.
Thanks
Schooner
The gear kit I bought did not include the cylinders.
The plans show the stroke to be 4.75" for the mains and 3.5" for the tail.
The two mains have a bore of 1.25" and the tail about .75".
Any ideas where I could get them would be greatly appreciated.
Thanks
Schooner