N404CX
Active Member
(CX4 kit of parts from Brian Riffel, #454, in Fresno, CA)
- Plans and Manual
- Notebook of articles on the CX4, including how-to’s
- Duplicate set of plans mounted on board stock for convenience
- All Specified sheet, angle, tubing, rod, etc. this includes all the unused material (drops) in all thicknesses
- Wicks kit for the CX4, without rivets; you get to choose your rivet scheme
- All of the forming blocks
-Formed parts: firewall, bulkheads, vertical stabilizer, wing ribs (the ribs and vert. stab were done by Katie Bosman (see message 16569 on the yahoo group)
-Both spars and center section – main bolt holes are drilled in ¼” only
-All the remaining sheet stock parts have been cut out by machine, but not formed.
You can see what he had here (The wooden stand in not included, nor is the light).The price is $3995.00 plus shipping plus materials for shipping.
I think the long tube containers can be limited to eight feet or less.
Glen Wilcox
818 991-6259
[email protected]
- Plans and Manual
- Notebook of articles on the CX4, including how-to’s
- Duplicate set of plans mounted on board stock for convenience
- All Specified sheet, angle, tubing, rod, etc. this includes all the unused material (drops) in all thicknesses
- Wicks kit for the CX4, without rivets; you get to choose your rivet scheme
- All of the forming blocks
-Formed parts: firewall, bulkheads, vertical stabilizer, wing ribs (the ribs and vert. stab were done by Katie Bosman (see message 16569 on the yahoo group)
-Both spars and center section – main bolt holes are drilled in ¼” only
-All the remaining sheet stock parts have been cut out by machine, but not formed.
You can see what he had here (The wooden stand in not included, nor is the light).The price is $3995.00 plus shipping plus materials for shipping.
I think the long tube containers can be limited to eight feet or less.
Glen Wilcox
818 991-6259
[email protected]