For Sale RV3 canopy, Sonerai1 gear legs

Discussion in 'For Sale & Wanted' started by Aviacs, Oct 21, 2019.

Help Support HomeBuiltAirplanes Forum by donating:

  1. Oct 21, 2019 #1

    Aviacs

    Aviacs

    Aviacs

    Member

    Joined:
    Oct 21, 2019
    Messages:
    16
    Likes Received:
    5
    Canopy has small shallow shop rash scratches in 2 places (see photos). Otherwise new, never removed from shrink wrap, never cut or drilled. 3/16" thick. clear. (no tint) Manufacturer unknown.

    These have occasionally been cut short & used on Sonerai 1 for more aerodynamic installation.
    Van's advised new cost $1,300+ Frame over $300. I'd like to get $650 for both.
    I talked directly to van's tech, but price seemed somewhat out of proportion. If anyone has contrary price info, please advise. I'm amenable.

    Sonerai 1 gearleg is 1/2" thick x 5" width as original spec. Most people now use 5/8" thick. Easily re-purposed for smaller airplane or UL. Manufacturer unknown. $250.

    Location: near KELM (Big Flats/Corning/Elmira, NY)
    I prefer not to ship the canopy due to size, cost, and the human factor that condition evaluations are subjective. Free pick-up. If you have a 3rd party rep in the area to inspect for your satisfaction I can work with them to crate and ship it at additional cost

    Gear legs - will pack & ship at cost.

    E h m co fab at gee male dot com

    DSC_0003.JPG DSC_0005.JPG DSC_0006.JPG DSC_0019.JPG DSC_0027.JPG
     
  2. Nov 12, 2019 #2

    Aviacs

    Aviacs

    Aviacs

    Member

    Joined:
    Oct 21, 2019
    Messages:
    16
    Likes Received:
    5
    Per Q's received:

    Weight is 17.2 lbs.

    I stated the width of the blank/top surface of the gear incorrectly - it is 6" wide, not 5".
    It could be reduced in width for a lighter airplane; to save a little weight.
    DSC_0020.JPG DSC_0022.JPG
     

    Attached Files:

Share This Page



arrow_white