morfineczka
New Member
Hello everyone.
I have project on my university and I need help.
Design example of the aircraft engine component providing:
And I have to design engine driving the turbine / turbine controler ( I was looking everywhere how to name it in english but I couldnt find - I hope, this translation is good) Pictures below:
http://postimg.org/image/yotbvl3u3/
http://s33.postimg.org/x9rr6v2r3/aparat_sterujacy_turbiny.png
1. The selected grade of material that meets the criteria and standard according to which it will be ordered;
2. Physical and chemical properties of the selected material;
3. Condition on delivery of material - before the start of the manufacturing process;
4. The proposed type of heat treatment, giving the final mechanical properties;
5. The potential change in properties with increasing temperature - within this range up to max. Working temperature;
6. The method of shape - the methods of processing, joining, surface roughness;
7. Type of protective covering - if required;
8. Test methods (destructive) and check the quality (NDT)
9. Based on the available literature review requirements discussed parts and justify your choice of material and technology for its implementation
Table / schedule:
http://postimg.org/image/aafxk50a3/
http://s33.postimg.org/z3phksjan/tabela.png
I know that it will be nickel alloy or cobalt alloy but I don't know which one..
If anyone has any idea how to make this project, please help me.
THANK YOU for your time
I have project on my university and I need help.
Design example of the aircraft engine component providing:
And I have to design engine driving the turbine / turbine controler ( I was looking everywhere how to name it in english but I couldnt find - I hope, this translation is good) Pictures below:
http://postimg.org/image/yotbvl3u3/
http://s33.postimg.org/x9rr6v2r3/aparat_sterujacy_turbiny.png
1. The selected grade of material that meets the criteria and standard according to which it will be ordered;
2. Physical and chemical properties of the selected material;
3. Condition on delivery of material - before the start of the manufacturing process;
4. The proposed type of heat treatment, giving the final mechanical properties;
5. The potential change in properties with increasing temperature - within this range up to max. Working temperature;
6. The method of shape - the methods of processing, joining, surface roughness;
7. Type of protective covering - if required;
8. Test methods (destructive) and check the quality (NDT)
9. Based on the available literature review requirements discussed parts and justify your choice of material and technology for its implementation
Table / schedule:
http://postimg.org/image/aafxk50a3/
http://s33.postimg.org/z3phksjan/tabela.png
I know that it will be nickel alloy or cobalt alloy but I don't know which one..
If anyone has any idea how to make this project, please help me.
THANK YOU for your time
Last edited: