I agree there were some issues in the past, but those had been fixed. A new fuel pump was introduced as well as installing the restrictor with a return line to the tank. The ignition modules was also redesigned.912 is great but needs fuel injection. I’m not a fan of those carbs. Also if the ignition module goes out it’s almost 2grand a piece and the older ones failed. I think that was a over heat issue because they would start working if u put a bag of ice on them. Probably should start a thread on Rotax 900 series problems. Almost forgot vapor lock on the old carb fuel pumps.
Got a link to that vid must have been 200HP??Just saw a video of a Rotax 914 boosted to 50 in/hg by Edge Performance AS. The thing is a screaming monster with a 3 bladed composite prop.
I think Smokey’s idea of a Jab 2200 for the S2 sounds like a fun project. I’ve seen them for sale new for $7500 by a US dealer.
Agreed, the 582 isn't an engine I would consider however the question asked was "has it been done?" From lessons learned rebuilding and flying 994SP, my preferred S2 engine would be the latest iteration Jabiru 2200. There are 5 flying in NZ and 1 in Italy all with great reviews.
Fast, slippery airplanes have a particularly difficult time keeping a 2 stroke happy - that partial power descent, or any time the prop is driving the engine are an invitation to a seizure. The Starlight and the Pulsar ran into this problem. A Sonerai with a 582 would either need spoilers or to make every descent a power-on full cross-control slip.The notion that the 582 is an engine designed specifically for aircraft is in my opinion poppycock. The basic engine design has been used in snowmobiles and PWC for eons prior it ever being put on an airplane. Yes the 582 version was specifically marketed for use on experimental airplanes and it does have some specific differences, but that doesn't make it a purpose designed engine. Rotax themselves has these disclaimers in their operator's manual for the 582.
"This engine, by its design, is subject to sudden stoppage. Engine stoppage can result in crash landings, forced landings or no power landings. Such crash landings can lead to serious bodily injury or death..."
"This is not a certificated aircraft engine. It has not received any safety or durability testing, and conforms to no aircraft standards. It is for use in experimental, uncertificated aircraft and vehicles only in which an engine failure will not compromise safety. "
"User assumes all risk of use, and acknowledges by his use that he knows this engine is subject to sudden stoppage..."
"Never fly the aircraft equipped with this engine at locations, airspeeds, altitudes, or other circumstances from which a successful no-power landing cannot be made, after sudden engine stoppage. "
"Aircraft equipped with this engine must only fly in DAYLIGHT VFR conditions."
Having said that, i have a Kitfox that is powered by a 582 and it is a decent engine on that airframe but it does require careful attention to operation in order to keep it operating within all of the various limitations. For example, EGT can climb above redline easily simply by making a partial throttle descent. It is manageable but has to be flown differently than a 4-stroke engine. Cold weather operation requires even more care. Is it a good engine? I think it is for certain purposes. On a Kitfox that can land at 30 mph and stop in about 200ft, yes. On something like a Sonerai I personally would not consider one over a VW conversion, but that is just me.
Was that 180kts? Nice!I'll add my 2 cents in support of the Jabiru engine. The 2200 is well suited to the Sonerai and when setup correctly it is smooth and gives few problems. Here is a link to a short video of another Sonerai 1 "down under" in South Australia but with a Jabiru 3300.
https://youtu.be/QXISyi0ZOFc
Here's a link and video of the most recent J2200 powered (S1) creation of Wayne's World (aircraft shop) WAY down under in NZ
V/R
Smokey
Enter your email address to join: