• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Search results

Advertise with us
Find deals on amazon
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. cjensen

    Aviation ball caps for sale, Velocity, EAA, EAA Homebuilders, Lycoming, Balz Out

    I have five ball caps for sale at $8 each plus $5.25 shipping in a flat rate box. I'll sell them all for $35 with shipping included. Each one is either new and unworn, or worn a couple of times, but cleaned. New, never worn, Balz Out Aviation in Reno, NV 2013 cap. Worn a few times, washed...
  2. cjensen

    Anti-chafe cloth tape for cowling

    New roll, should be about 30' here. $15 shipped
  3. cjensen

    Homebuilt C-frame dimpler

    For sale is my homebuilt C-frame dimpler with a 20" throat. The top hammer set is not spring loaded, but works great! Can be easily repainted. $100 shipped...it's heavy.
  4. cjensen

    Little red kiddie biplane, signed by Paul Poberezny

    This is a kiddie biplane that I bought at an internal EAA auction a few years ago and is now just sitting in the garage collecting dust. Teach your little one's the 'in's and out's' of "flying" a taildragger. Powered by their little feet, steered by their little feet. It is signed by EAA #1...
  5. cjensen

    Cadet STF?

    Anybody know if Neal is still around with plans? They are still listed on Spruces website and they are usually pretty good about being current. I emailed Neal last week to inquire and haven't had a response yet.
  6. cjensen

    Wittman Tailwind W10 plans with Clement mods and Stanton manual

    I bought the plans, Clement mods, and Stanton assembly manual after I sold my Tailwind project thinking that I would start another one. It's just not in the cards for me right now. NOTE- the rib drawings were sold with my previous project, so the plans need those. I was gonna build metal wings...
  7. cjensen

    Hamilton Watch Co. WWII panel clock

    Some of you guys may be interested in this for something nostalgic in your panel... A fairly rare Hamilton mechanical panel clock from WWII that was used in various airplanes from F6F Hellcats, F4U Corsairs, to PV2 Harpoons. Its in good condition considering it's age and works perfectly. I...
  8. cjensen

    Mustang II wing and center section kit, unstarted

    Complete wing and center section kit for a Mustang II. Front and rear spars were factory built by Mustang Aero, anodized, & center section main spar is powdercoated. The center section was built for a retractable gear airplane, but can be used for fixed gear as well, just make the appropriate...
  9. cjensen

    Cuby and C-90 project for sale

    Cuby ribs and C-90 project for sale Going another direction, yet again. Details here-WagAero Cuby Sport Trainer Project For Sale
  10. cjensen

    The new digital Experimenter is out!

    We just launched the inaugural issue of the new, revamped digital Experimenter magazine. Check it out here for the issue, or to sign up, to get it if you haven't already! EAA - Experimenter - EAA's Homebuilders Newsletter :):)
  11. cjensen

    Cougar project

    I was going to restore the Cougar, but space is at a premium, and I need to keep moving on the Tailwind...For sale is my Nesmith Cougar airplane project. Originally completed and flown in 1982, this air-frame has about 41 hours of flight time on it and has been recently completely stripped of...
  12. cjensen

    4" prop extension

    It doesn't have the Saber sticker on it, but I believe it is a Saber extension. 4" extension, 6" flanges (pic makes it look like the prop side is wider, but it's 6"). Engine side has 5/8" bushing holes, both sides are 3/8" bolt holes. $250 shipped US only.
  13. cjensen

    Two aluminum spinners, 8" and 10"

    Both are bit dirty, but in decent shape.The orange (10") one is in better shape than the paint shows. Both have back plates. $50 each, shipped, US ONLY. 8" 10"
  14. cjensen

    Starter for an O-235, Delco-Remy 1109657

    Another one from the box of parts. Delco-Remy part number 1109657, for an O-235. $115 shipped US ONLY.
  15. cjensen

    Harrison Oil Cooler

    7 plate Harrison oil cooler for sale. I don't know anything about this one as it came in a box of parts. It has an overhaul sticker on it out of California, but no date other than original manufacture stamp from November '72. SOLD
  16. cjensen

    Lycoming O-290-G

    Buyer didn't come through, for sale again...O-290-G that came off my my Cougar project that has 41 hours on it. There are no log books to back up that info though. It has both mags (along with three additional mags for parts), fuel pump, vacuum pump, and tach drive. The airplane last flew in...
  17. cjensen

    Marvel Schebler MA-3SPA carb

    Removed from an O-290 with 41 hours on it, should be good for overhaul. No tags or log history. Sold
  18. cjensen

    Air box for MS MA-3 carb

    Used air box for an MA-3 carb, may fit others with the same carb flange. $55
  19. cjensen

    Lycoming O-290 four in to one exhaust $125

    Exhaust didn't work for previous buyer, for sale again with a greatly reduced price.Four in to one exhaust system for an O-290 with two heat muffs. Came off an airplane with 41 hours total time on it, and then sat for several years. It's in useable shape, and I will ship anywhere in the US. SOLD
  20. cjensen

    Continental C-90 oil tank

    I have a bunch of C-90 parts that I'll be listing. First up is an oil tank. Tank is sold. I have two cases and two sets of cylinders, but need to inspect them first.
Back
Top