• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Search results

Find deals on amazon
Advertise with us
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. V

    Engine Mount Design

    Hi Gang, What is everyone using to design engine mounts? Would like to try a small project and hopefully use a CNC tube cutter in the process. Thanks
  2. V

    Thoughts: Lycoming O-290G with O-435 jugs

    Hi all, I have 2 O-290G's in my garage and always thought about using O-435 jugs on them. Before I go down this road, is there anything I should know about this contraption. I know the airboaters do this but is it safe for flight. Shouldn't a cylinder hold down pin be used? Also, what sought of...
  3. V

    Lars Giertz's VMaxProbe (N1200M)

    Folks, I have read the little bit of what is available online about the accident that took Lars' life. The design itself looked slick and interesting. He was on his first flight when he crashed. While paying respect to the dead, could anyone knowledgeable describe any possible design issues...
  4. V

    Truss chormoly fuselage pusher

    All, I am in the beginning stages of a niche design but before I embark, I want to make sure there isn't something close enough that can meet some of the requirements. In an attempt to increase the Vne of the Longeze/Varieze class aircraft, I thought one could perhaps build the fuselage out of...
  5. V

    GE/T406 Engine. What would you design / build?

    So a friend of a friend has offered a jet engine with considerable life left before any work is needed. The cost is less than an overhauled Continental IO-550. I thought about a Turbine Cozy but wouldn't a purpose built design be better. Maybe a stretched cozy for simplicity of design. This is...
  6. V

    Tube and Fabric low wing similar to KR-2

    I have a friend who is interested in building an Experimental Aircraft. He is a great welder and asked me if there was a low wing tube and fabric design he could study; something similar to a KR-2 and also powered by a VW or so. I couldn't think of one but told him a Sonerai I could be widened...
  7. V

    Aluminum Wing(Symmetric) for Aeorbatic

    From talking to a lot of folks about getting an aerobatic ship, wing failures continue to be a problem/concern. So, why not aluminum? Even if there is a weight penalty, the peace of mind is probably worth much more. Can a suitable wing be designed and built for an aircraft with 150hp -200hp...
  8. V

    Unlimited Aluminum Aeorbatic Aircraft

    Is there any experimental aerobatic aircraft in the unlimited category. I know there is the Shukoi in the certified parlance but how about experimental. Why don't we see much of this around? Thanks
  9. V

    Mudry CAP 230

    Folks, I am looking for any pictures or insights into how the Mudry Aerobatic mounts are designed to withstand aerobatic forces. I know the wings are full on aerobatic but how is the fuselage designed. I have tried to find pictures but to no avail. Would like to design/build something similar...
  10. V

    Lycoming rebuild for experimental use (50-100 miles around Lexington, KY)

    Hi, I am looking for someone reputable and fairly priced mechanic to help rebuild an O-360 for experimental use. Somone within 50 - 100 miles of Lexington, KY would be ideal. Thanks
  11. V

    Revmaster 2180, Prop and Tailwheel

    Hi All, Unfortunately I have to sell my engine, prop and a few other parts I have. Engine is complete with only 4 hours run time. I took it apart but never did put it back, but everything is there. The prop is brand new and has never been used. I will also ad a tail wheel, spring/castor as...
  12. V

    O-360A3A

    Hi all, I need an O-360 cores. if anyone has one laying around. Thanks
  13. V

    Cowling for VW

    Hi All, Are there any cowlings out there for VW without the traditional cowl chicks like the Sonerai. I know there are some for the KR-2 but have not been able to find one. It appears that almost every KR-2 builder fabricates theirs. It makes sense because no 2 KR are the same. Thanks
  14. V

    Unique 2180 Revmaster Engine

    Hi All, Does anyone have one of the older Revmaster engines with a generator on the flywheel. Are there any issues with this setup. Any problems fitting in a Sonerai cowling? Thanks for the response.
  15. V

    Sonerai 1 and dimensions

    Hi All, I am still in search of a project but in the mean time, I thought I should get some data on the Sonerai I. I understand the length is about 16- 8" from nose cone to tail. Also from reading around, the cockpit is about 20-5/8" wide and 31-1/8" long excluding leg room. Could someone...
  16. V

    Prop overhaul Shop

    Hi All, Is there a reputable prop overhaul shop on the West Coast someone can recommend me to. I have a McCauley metal prop that needs overhaul. I have heard of prop shops and their less than stellar practices and that is why I am turning to the community. I appreciate your assistance...
  17. V

    Sonerai Wings

    Hi All, Is there anyone on the West Coast, preferably California with finished Sonerai wings? Thanks
  18. V

    O-320 E2D for sale or trade

    Hi, I have a Lycoming O-320 E2D for sale. It has no log books but it does come with ALL accessories so I am selling it as a rebuildable core. I will sell for $4800 OBO or trade for something of equal value. I will pay for half of shipping cost from Hawaii. Thanks
  19. V

    Spar box retaining bolt

    Hi all, How do you finish a wooden spar box with reference to the retaining bolt and the hole it goes through. I was thinking of cutting a tube with the same ID size as the bolt and then glueing it in. Does this make sense or is there an alternative/better method. Also on the issue of bolt...
  20. V

    What aircraft is this?

    Does anyone know what this aircraft is. I do not what it is but saw it on Barnstormers last year but could not recollect what it is. Thanks
Back
Top