• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of home-built aviation.

    Why support HomebuiltAirplanes.com?

    • Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts.
    • Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.
    • Enjoy enhanced account features that enrich your experience, including the ability to disable ads.

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Straighten bent tube idea

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Built2Fly

Well-Known Member
Joined
Feb 21, 2020
Messages
157
Location
San Diego, California, USA
I had a recent minor incidence with my airplane resulting in two tubes on the fuselage being bent. One is 3/4" OD and the other is 5/8" OD. I watched some YouTube video on how to bend back those tubes, and I still have some questions maybe some of you can help.
  1. These two bents are on connected tubes. Could I bent both back together? Or do I have to cut one open, bend the other back, and then weld the tube that has been cut open?
  2. How hard is it to bend back 3/4" OD tube? Can it be easily done with just wood blocks and clamps, or do I need some serious leverage and strength to get it done?
Thanks a lot for your help.

Adam
 
Back
Top