Seat belts / shoulder harness hardware

Homebuilt Aircraft & Kit Plane Forum

Help Support Homebuilt Aircraft & Kit Plane Forum:

BJC

Well-Known Member
HBA Supporter
Joined
Oct 7, 2013
Messages
13,111
Location
97FL, Florida, USA
Question for Riggerrob and anyone else with relevant experience:

Reference photo below. Are the “U” shaped clips that hold the slide in the slots, and not the spring that loads the slide, removable and reusable or must they be replaced with new following removal? What is the technique for removing them?

2AF8AB0F-1894-4C71-9D77-055F8BE5767F.jpeg

Thank you.


BJC
 

Riggerrob

Well-Known Member
Joined
Sep 9, 2014
Messages
1,957
Location
Canada
Question for Riggerrob and anyone else with relevant experience:

Reference photo below. Are the “U” shaped clips that hold the slide in the slots, and not the spring that loads the slide, removable and reusable or must they be replaced with new following removal? What is the technique for removing them?

View attachment 111373

Thank you.


BJC
Do you have a side-view of that hardware?
 

BJC

Well-Known Member
HBA Supporter
Joined
Oct 7, 2013
Messages
13,111
Location
97FL, Florida, USA
Dan:

The hardware is on a three point restraint furnished with a Glasair Aviation kit, and the springs are different from the Cessna hardware.

Rob:

I’ll get a better photo tomorrow.

Thanks,

BJC
 
Top