SDS at Oshkosh 2019

Discussion in 'Supplier / Manufacturer Announcements' started by rv6ejguy, Jul 15, 2019.

Help Support HomeBuiltAirplanes Forum by donating:

  1. Jul 15, 2019 #1

    rv6ejguy

    rv6ejguy

    rv6ejguy

    Well-Known Member

    Joined:
    Jun 26, 2012
    Messages:
    3,640
    Likes Received:
    2,669
    Location:
    Calgary, Alberta, Canada
    For those of you going to Oshkosh and are interested in SDS products, here is where you can see and find out more about them:

    EM-5 EFI/EI:

    Aviation West LLC booth #638/639- Ray Watson with his Murphy Moose

    Go-EZ Aerobatics- Kyle Fowler. He'll be performing on Tuesday and Sunday as well as participating in the 40th anniversary formation flight on Thursday honoring Burt Rutan. Will be parked Tues and Sunday in the Performer Parking and I believe near the Aero Sport Power booth #270 the rest of the time.

    South MS Light Aircraft- Ronnie Smith. Rotax Service and Training Center, Forum 1030 Booths 265, 266, 267

    Les Kearney will have his RV-10 at the show. Registration C-GROK, parked in the RV-10 lineup. Les will be happy to talk about his installation and show it.

    Ralph Inkster will be doing a tech talk in the EAA Canada tent on Friday 1130 AM and EFI/EI wiring tech talk at 1 PM the same day. Ralph will also be flying down in his 6A with SDS EM-5 and will be available to show and talk about that.

    CPI-2 Ignition systems:

    Aero Sport Power booth #270. They'll have a CPI-2 on display.

    Barrett Precision Engines booth #3036, Bldg C. They will also have a CPI-2 on display.

    Also starting today, we'll have a special on the SDS Aero Products billet valve covers for parallel valve Lycomings and the SDS No Leak induction flange kits for Lycoming engines. 10% off both items until July 31st. Contact me if you're interested in either of those items or our EFI and EI products.

    I won't personally be at Osh unfortunately. We are working hard at getting orders out to our customers, getting things rolling on the 2nd CPI-2 batch order and design work is forging ahead on the EM-6 as well.
     
    Chris In Marshfield likes this.
  2. Jul 15, 2019 #2

    tailwind

    tailwind

    tailwind

    Member

    Joined:
    Mar 16, 2015
    Messages:
    15
    Likes Received:
    7
    Location:
    KS
    CPI-2? Have you revised it?
     
  3. Jul 15, 2019 #3

    rv6ejguy

    rv6ejguy

    rv6ejguy

    Well-Known Member

    Joined:
    Jun 26, 2012
    Messages:
    3,640
    Likes Received:
    2,669
    Location:
    Calgary, Alberta, Canada
    There is a 2nd batch of CPI-2 PCBs due to arrive from loading this week. These have only minor mods compared to the first batch. If you are maybe thinking CPI, the CPI-2 is a totally different design. About a year ago, we offered a grey keypad option on the CPI. That is the only recent change on it.

    Can see info on both here:

    CPI http://www.sdsefi.com/cpi.htm
    CPI-2 http://www.sdsefi.com/cpi2.htm
     
  4. Jul 16, 2019 #4

    rv6ejguy

    rv6ejguy

    rv6ejguy

    Well-Known Member

    Joined:
    Jun 26, 2012
    Messages:
    3,640
    Likes Received:
    2,669
    Location:
    Calgary, Alberta, Canada
    Here's a short video of Kyle Fowler's EZ.

    Look out for him at Oshkosh.
     

Share This Page

arrow_white