Quantcast

Post your Builder's Log website Here.

HomeBuiltAirplanes.com

Help Support HomeBuiltAirplanes.com:

M

Msuper3500

Guest
Hi Everyone,

I belong to a company called Micro Fasteners. I've been helping hobbyists like yourselves for many years and can offer advice for the build of nearly any of your projects. Reply to this message if there's any way I can help you out.

Thank you,
Rich
 

DanB

New Member
Joined
Jun 17, 2011
Messages
1
Location
Mesa, Arizona
I have been working on a Kitfox IV for several years. The build site I was using was Yahoo SiteBuilder. I have had quite a bit of trouble logging in to update the site since I "updated" to Windows 7. There is quite a bit of info on the build here almost complete. www.azshowersolutions.com/Kitfox1.html
Dan
 

1Bad88

Well-Known Member
Joined
Jul 18, 2012
Messages
553
Location
Bellville, TX

planecrazzzy

Well-Known Member
Joined
Aug 16, 2003
Messages
330
These are some of my Favorites...
Gotta Fly...
Mike & "Jaz" the Flying Dogz
.
.Jaz - Mutt Muffs 003.jpgJaz - Mutt Muffs 009.jpgHPIM0175.JPG
 

NynjaScott

New Member
Joined
Aug 28, 2013
Messages
1
Location
Queensland Australia
Hi all:

Just new to this site.
Here's the link to my build log photo gallery for my Skyranger Nynja.
Build Photos 1
I live in Australia and have been flying the Nynja for a bit over 12 months now. My Nynja was also in the completions section of Kitplanes and was a centrefold *blush* in "Sport Pilot" the magazine of our governing body RA-Aus.
 

Head in the clouds

Well-Known Member
Joined
Mar 11, 2012
Messages
1,983
Location
Gold Coast, East Coast of Australia
Hi all:

Just new to this site.
Here's the link to my build log photo gallery for my Skyranger Nynja.
Build Photos 1
I live in Australia and have been flying the Nynja for a bit over 12 months now. My Nynja was also in the completions section of Kitplanes and was a centrefold *blush* in "Sport Pilot" the magazine of our governing body RA-Aus.
Hi Scott,

Now there's a familiar face - welcome to HBA g-day-mate.gif

Cheers, Alan
 

Richard6

Well-Known Member
Joined
Aug 14, 2010
Messages
702
Location
Plymouth, MN USA
Scott,

I am not a fan of using band wraps as you are on rubber and plastic tubing. The tubing collapses and then the band wrap is loose and not doing what you intended it to do. Then if you tighten it, you start to restrict the flow or stop it completely.

Otherwise looks like great work and good photography.

Not sure what the red paint is for. I have never seen a nylock nut back off.

I would suggest something like this.

Yes you still have to use a band wrap, but at least the anchor will stay put.



Richard
 

Attachments

Last edited:
Top