I need to clean a lot of aircraft parts out of the hanger. Just getting to much.
4 seat Bearhawk parts
1-- Aluminum wing struts for 3 Bearhawks from Bob Barrows.
2-- Wing parts kit for a set of Bearhawk wings except for the wing fuel tanks and fiberglass wing tips. Spar webs bent up with all the spar cap material, ribs made, all alum for wing skins, all metal hardware. Rivet kit for wings from Wicks, flap return springs, Flap and aileron ribs.
3-- Fiberglass nose bowl from Bob Barrows.
Cessna 172 airframe parts.
1-- One swept fin for a 1972
2-- One baggage door for a 1972
3-- Like new aluminum nose bowl for a 1965
4-- Fuel valve for 1956-- 1960.
5-- 2 sets of doors. 1958 and 1972.
6-- One left elevator for 1964 .
7-- 2 sets of main landing gear. Flat type. Have to check, I think one set is for a 1958 and the other a latter model.
8-- Several damaged exhaust systems for Lyc 320-360 engine in 172's. Good parts to make an exhaust system for lyc in a homebuilt.
9-- Like new engine mount for Cont- 0-300. 1963--1967.
10-- New Cessna aluminum stab skins for 1959 Cessna 172. I would hate to price these today from Cessna.
One Ercoupe aileron-- Not sure, I think its a left.
Right and left mufflers for Cont- 0-200 in Cessna 150.
Could be more, this is from memory, need to look around hanger for more parts.
4 seat Bearhawk parts
1-- Aluminum wing struts for 3 Bearhawks from Bob Barrows.
2-- Wing parts kit for a set of Bearhawk wings except for the wing fuel tanks and fiberglass wing tips. Spar webs bent up with all the spar cap material, ribs made, all alum for wing skins, all metal hardware. Rivet kit for wings from Wicks, flap return springs, Flap and aileron ribs.
3-- Fiberglass nose bowl from Bob Barrows.
Cessna 172 airframe parts.
1-- One swept fin for a 1972
2-- One baggage door for a 1972
3-- Like new aluminum nose bowl for a 1965
4-- Fuel valve for 1956-- 1960.
5-- 2 sets of doors. 1958 and 1972.
6-- One left elevator for 1964 .
7-- 2 sets of main landing gear. Flat type. Have to check, I think one set is for a 1958 and the other a latter model.
8-- Several damaged exhaust systems for Lyc 320-360 engine in 172's. Good parts to make an exhaust system for lyc in a homebuilt.
9-- Like new engine mount for Cont- 0-300. 1963--1967.
10-- New Cessna aluminum stab skins for 1959 Cessna 172. I would hate to price these today from Cessna.
One Ercoupe aileron-- Not sure, I think its a left.
Right and left mufflers for Cont- 0-200 in Cessna 150.
Could be more, this is from memory, need to look around hanger for more parts.
Last edited: