• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Parts For Sale KR2 Project - Complete Airframe, Lots of extras

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

O2flyMore

Active Member
Joined
Sep 15, 2021
Messages
27
Location
KLXT
This is a slightly stretched KR2 project, with all the parts and subassemblies to complete the airframe. The workmanship has been rated by KR owners as excellent, even exceptional, with a well thought out plan that paid attention to detail. Weights on the project are right on target to result in a normal finished aircraft weight of 500-600 pounds.

The completed lower fuselage (boat) is on tri-gear, complete with wheels, tires, and brakes. The firewall is installed, including a VW motor mount installed, even with a Diehl accessory case. Cockpit controls are tube and cable, and the single center stick works very smoothly. A belly board and flaps are both installed, with separate actuators for each. Tailfeathers are mounted and installed (even balanced) and trim tabs and cables present. The top fuselage is also complete, with canopy frame and a mold for the canopy bubble included.

Wings subassemblies include KR2S spars, with attach fittings are installed. Premolded wing skins will reduce build time and give a smoother finished surface.
Lots of additional extras that will save buyer a lot of work and expense.

Located at KLXT in Kansas City. I'd like to get $1500 , but need to get it out of my hangar ASAP, so reasonable offers are welcomed.
 

Attachments

  • P5023476.JPG
    P5023476.JPG
    79.4 KB · Views: 98
  • P5023478.JPG
    P5023478.JPG
    77.1 KB · Views: 96
  • P5023479.JPG
    P5023479.JPG
    78.6 KB · Views: 93
  • P5023480.JPG
    P5023480.JPG
    80.5 KB · Views: 92
Back
Top