• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Dual fuel filters, pumps, check valves stack - vibration question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Flow

Well-Known Member
Joined
Apr 27, 2016
Messages
130
Location
Auckland
Hello folks,

This is what ULPower, the engine manufacture recommend.
1595883927914.png

I am looking to move away from slip on fittings to AN (and braided teflon for the flex hoses).
This is one side of the 100 micron filter > Bosch 044 pump with AN both ends > Check valve stack.
Note the T fittings to separate the flow to the two pumps and then rejoin again to the post filter.
20200706_102231.jpg
I like how everything just bolts together with minimal moving parts - however...

The question is how should I mount this to the firewall to protect the filters pump and check valves from vibration as they will all have different resonant frequencies (and mounting radii).
I don't want the filters or check valves to snap off the pump at the threads.
 
Back
Top