Hello folks,
This is what ULPower, the engine manufacture recommend.
I am looking to move away from slip on fittings to AN (and braided teflon for the flex hoses).
This is one side of the 100 micron filter > Bosch 044 pump with AN both ends > Check valve stack.
Note the T fittings to separate the flow to the two pumps and then rejoin again to the post filter.
I like how everything just bolts together with minimal moving parts - however...
The question is how should I mount this to the firewall to protect the filters pump and check valves from vibration as they will all have different resonant frequencies (and mounting radii).
I don't want the filters or check valves to snap off the pump at the threads.
This is what ULPower, the engine manufacture recommend.
I am looking to move away from slip on fittings to AN (and braided teflon for the flex hoses).
This is one side of the 100 micron filter > Bosch 044 pump with AN both ends > Check valve stack.
Note the T fittings to separate the flow to the two pumps and then rejoin again to the post filter.
I like how everything just bolts together with minimal moving parts - however...
The question is how should I mount this to the firewall to protect the filters pump and check valves from vibration as they will all have different resonant frequencies (and mounting radii).
I don't want the filters or check valves to snap off the pump at the threads.