Does any one have a R&D 503UL RD-1 Tuned Pipe that makes 62.3hp at 6500rpms?

Discussion in 'General Experimental Aviation Questions' started by Armilite, Feb 1, 2015.

Help Support HomeBuiltAirplanes Forum by donating:

  1. Feb 1, 2015 #1

    Armilite

    Armilite

    Armilite

    Well-Known Member

    Joined:
    Sep 6, 2011
    Messages:
    3,086
    Likes Received:
    250
    Location:
    AMES, IA USA
    Does any one have a R&D 503UL RD-1 Tuned Pipe that makes 62.3hp at 6500rpms?

    Can you take some measurements, or is it for Sale?

    I'm only interested in the RD-1 pipe, they made 3 other 503 pipes.

    [TD="width: 14%"]RPM BRAKE[/TD] [TD="width: 29%"] FUEL FLOW/HR[/TD] [TD="width: 28%"]
    B.S.F.C.
    [/TD] [TD="width: 14%"]
    CORR.HP
    [/TD] [TD="width: 15%"]
    CORE TORQUE
    [/TD]
    [TD="width: 15%"]3500[/TD] [TD="width: 13%"]23.2[/TD] [TD="width: 11%"]21[/TD] [TD="width: 13%"]15.5[/TD] [TD="width: 13%"]1.36[/TD] [TD="width: 18%"]15.7[/TD] [TD="width: 17%"]23.6[/TD] [TD="width: 15%"]4000[/TD] [TD="width: 13%"]26[/TD] [TD="width: 11%"]21[/TD] [TD="width: 13%"]19.8[/TD] [TD="width: 13%"]1.06[/TD] [TD="width: 18%"]20.1[/TD] [TD="width: 17%"]26.4[/TD] [TD="width: 15%"]4500[/TD] [TD="width: 13%"]29.6[/TD] [TD="width: 11%"]32[/TD] [TD="width: 13%"]25.4[/TD] [TD="width: 13%"]1.26[/TD] [TD="width: 18%"]25.8[/TD] [TD="width: 17%"]30.1[/TD] [TD="width: 15%"]4750[/TD] [TD="width: 13%"]40.2[/TD] [TD="width: 11%"]32[/TD] [TD="width: 13%"]38.3[/TD] [TD="width: 13%"].84[/TD] [TD="width: 18%"]38.9[/TD] [TD="width: 17%"]40.9[/TD] [TD="width: 15%"]5000[/TD] [TD="width: 13%"]46.2[/TD] [TD="width: 11%"]38[/TD] [TD="width: 13%"]46.2[/TD] [TD="width: 13%"].82[/TD] [TD="width: 18%"]47[/TD] [TD="width: 17%"]47[/TD] [TD="width: 15%"]5250[/TD] [TD="width: 13%"]47.9[/TD] [TD="width: 11%"]39[/TD] [TD="width: 13%"]50.2[/TD] [TD="width: 13%"].78[/TD] [TD="width: 18%"]51[/TD] [TD="width: 17%"]48.7[/TD] [TD="width: 15%"]5500[/TD] [TD="width: 13%"]48.6[/TD] [TD="width: 11%"]40[/TD] [TD="width: 13%"]53.2[/TD] [TD="width: 13%"].75[/TD] [TD="width: 18%"]54.1[/TD] [TD="width: 17%"]49.4[/TD] [TD="width: 15%"]5750[/TD] [TD="width: 13%"]49.6[/TD] [TD="width: 11%"]38[/TD] [TD="width: 13%"]56.7[/TD] [TD="width: 13%"].67[/TD] [TD="width: 18%"]57.6[/TD] [TD="width: 17%"]50.4[/TD] [TD="width: 15%"]6000[/TD] [TD="width: 13%"]50.5[/TD] [TD="width: 11%"]40[/TD] [TD="width: 13%"]60.1[/TD] [TD="width: 13%"].67[/TD] [TD="width: 18%"]61.1[/TD] [TD="width: 17%"]51.4[/TD] [TD="width: 15%"]6250[/TD] [TD="width: 13%"]49.4[/TD] [TD="width: 11%"]41[/TD] [TD="width: 13%"]61.1[/TD] [TD="width: 13%"].67[/TD] [TD="width: 18%"]62.2[/TD] [TD="width: 17%"]50.2[/TD] [TD="width: 15%"]6500[/TD] [TD="width: 13%"]47.7[/TD] [TD="width: 11%"]41[/TD] [TD="width: 13%"]61.3[/TD] [TD="width: 13%"].67[/TD] [TD="width: 18%"]62.3[/TD] [TD="width: 17%"]48.5[/TD] [TD="width: 15%"]6750[/TD] [TD="width: 13%"]45.2[/TD] [TD="width: 11%"]38[/TD] [TD="width: 13%"]60.2[/TD] [TD="width: 13%"][/TD] [TD="width: 18%"]61.3[/TD] [TD="width: 17%"]46 [/TD]
    Thanks
    Rich
     
  2. Feb 1, 2015 #2

    Armilite

    Armilite

    Armilite

    Well-Known Member

    Joined:
    Sep 6, 2011
    Messages:
    3,086
    Likes Received:
    250
    Location:
    AMES, IA USA
    Also, did it require any Jetting Changes?
     

Share This Page



arrow_white