Champion V project

Discussion in 'General Experimental Aviation Questions' started by stevetosh, Oct 13, 2019 at 12:36 AM.

Help Support HomeBuiltAirplanes Forum by donating:

  1. Oct 13, 2019 at 12:36 AM #1

    stevetosh

    stevetosh

    stevetosh

    Well-Known Member

    Joined:
    Dec 25, 2010
    Messages:
    189
    Likes Received:
    3
    Location:
    brisbane, Australia
    Good day ladies and gentlemen,

    Am about to purchase a project however there are some damages to the project which am seeking advise from you guys that have built a wooden plane.
    In regards to the damages in the attached pictures what is/are your suggestions.

    1. Damage to the canopy rail which is delamination, do I have to rebuild this section or a glue and binded pressure will fix it?

    2. In regard to the damages on the fuselage, I know the whole ply has to come off but any suggestions on how to peel the ply off to replace it.

    All response are highly appreciated.

    Thanks
     

    Attached Files:

Share This Page

arrow_white