jandetlefsen
Well-Known Member
- Joined
- Apr 9, 2020
- Messages
- 317
Reading though the Dynon HDX installation manual it says that the Skyview can tune active frequencies on a Garmin SL30:
"In addition to the NAV radio functions of the SL30, SkyView can display COM radio information from the SL30 on the top bar of the SkyView display(s) and send COM frequencies to the SL30 (TUNE COM)."
Same about the SL40:
"SkyView can display COM radio information from the SL40 on the SkyView top bar and send COM frequencies to the SL40 (TUNE COM)."
However about the GTR200 it can only do this:
"Garmin GTR 200
Garmin GTR 225 COM Radio
Garmin GNC 255 COM Radio / NAV Receiver:
SkyView can send frequencies to the GNC 255’s standby frequency."
Technically the GTR200 can receive active frequencies from something like a G3X, is there a reason why Skyview can only set the standby frequency or is that a lack of details in the documentation only?
About the transponder connection it only states that it can send altitude information to the transponder and read out the transponder status but does not mention of it can set the squawk code.
"In addition to the NAV radio functions of the SL30, SkyView can display COM radio information from the SL30 on the top bar of the SkyView display(s) and send COM frequencies to the SL30 (TUNE COM)."
Same about the SL40:
"SkyView can display COM radio information from the SL40 on the SkyView top bar and send COM frequencies to the SL40 (TUNE COM)."
However about the GTR200 it can only do this:
"Garmin GTR 200
Garmin GTR 225 COM Radio
Garmin GNC 255 COM Radio / NAV Receiver:
SkyView can send frequencies to the GNC 255’s standby frequency."
Technically the GTR200 can receive active frequencies from something like a G3X, is there a reason why Skyview can only set the standby frequency or is that a lack of details in the documentation only?
About the transponder connection it only states that it can send altitude information to the transponder and read out the transponder status but does not mention of it can set the squawk code.