• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Another French twist: Albert Gatard's Statoplan

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cluttonfred

Well-Known Member
Supporting Member
Joined
Feb 13, 2010
Messages
10,744
Location
World traveler
Returning to one of my favorite topics -- unconventional French aircraft designs -- here is another one that proves that there is always another way to do things.

Back in the 1950s Albert Gatard created a conventional-looking homebuilt monoplane with very unconventional controls. His low-wing, single-seat Gatard Statoplan AG 02 Poussin (Chick) was comparable in size, power (1200cc 25hp VW) and construction (wood and fabric) with other French homebuilt single-seaters of the era such as the Jodel D.9 Bébé and the Druine D.31 Turbulent. While not as common as the Jodel or Druine, the Poussin was (and occasionally still is) built in some numbers by amateur enthusiasts.

What made the Statoplan special was its very unusual control system. Basically, there were full-span control surfaces on each wing that were called flaperons but really acted as elevons. Roll control was conventional, as was the pedal-operated rudder, but pulling back on the stick lowered the elevons, thereby increasing wing camber, lift and drag. A connection between the stick and the otherwise fixed, all-flying horizontal stabilizer trimmed out the pitch change caused by lowering the elevons--the fuselage was said to stay within 4° of horizontal whether in the climb, descent or level flight. It’s unclear from what I have read whether or not the elevons could also be lowered via a separate control to function as flaps, but that certainly seems possible.

The aircraft was said to be very maneuverable, even capable of aerobatics, with excellent short-field performance yet docile enough for low-time pilots. According to Gatard, the drag of the lowered elevons in climb was offset by reduced fuselage drag. Whatever the reason, the little Poussin had performance in cruise equal to or better than it's contemporaries and, of course, visibility when climbing or landing was excellent.

All in all, it's an interesting approach. Personally, I wonder if a larger fixed horizontal stabilizer might obviate the need for the interconnected pitch trim for a simpler arrangement with the same benefits except for a slight reduction in speed?

Cheers,

Matthew

Sources:

Gatard Statoplan Poussin - Wikipedia, the free encyclopedia

Gatard AG-02 'Statoplan Poussin' - Tourisme - Un siècle d'aviation française
Construire son avion (Gatard AG02 Poussin)
Pou-Guide - Saintes 1958 : RASSEMBLEMENT R.S.AGatard AG-02 Statoplan Poussin
Heikkis' Silhouette Challenge - Page 257 - PPRuNe Forums

PS -- To my surprise I found an English-language article on the Gatard Statoplan in a 1959 issue of EAA's Sport Aviation magazine. Enjoy!
 

Attachments

  • ag02_01.jpg
    ag02_01.jpg
    270.7 KB · Views: 302
  • passage1a.jpg
    passage1a.jpg
    335.7 KB · Views: 248
  • ag02-2.jpg
    ag02-2.jpg
    64 KB · Views: 300
  • img355a.jpg
    img355a.jpg
    38.8 KB · Views: 213
  • ag02-1.jpg
    ag02-1.jpg
    66.8 KB · Views: 299
  • Is Your Elevator Necessary - Ron A Cole - Sport Aviation - 1959_05_11.pdf
    787.2 KB · Views: 160
Last edited:
Back
Top