WindHorseRookie
Well-Known Member
I have a 582 with 105hrs on it. It has done some sitting but was taken down inspected and new rings and seals were installed when it went back together. Carbs were cleaned and all new brass parts and seals replaced. Needle , needle jet, main jet, idle jet.
rotary shaft got new oil and it also got new plugs.
I run 93/100% gas
Following the recommended Rotax maintenance guide,
how reliable will this engine be?
rotary shaft got new oil and it also got new plugs.
I run 93/100% gas
Following the recommended Rotax maintenance guide,
how reliable will this engine be?