Search results

Homebuilt Aircraft & Kit Plane Forum

Help Support Homebuilt Aircraft & Kit Plane Forum:

  1. C

    Sunglass Lenses ?

    Been running Green #4++ tint for the last 15 years or so, which is supposed to be as dark as one can get. Even that isn't dark enough for my needs. Had some that were the smoke gray tint and they were terrible for me.
  2. C

    replica's other than p-51 p-40

    Ron W. and I know of an R2 that’s going together right now and might do a first engine start within a few months. It’s already pretty small, so scaling it down much if any might be a problem.
  3. C

    HUD

    HUDs have their place, but low and slow is not it.
  4. C

    Mo(u)lded plywood construction?

    Fresh cut cedar posts for fencing has been used in the south since back in the early 1800's. I've worked fence sections that had cedar posts in place for nearly a hundred years and the posts were still good!
  5. C

    Mo(u)lded plywood construction?

    It’s interesting to see the progression from the original wet layup of the Vega, to a dry layup with steam curing and then the dry layup with RF curing as the Fairchild progressed. It would be interesting if someone did the research necessary to marry the RF cure with modern composites.
  6. C

    Mo(u)lded plywood construction?

    Hit Kermit's youtube channel, as there are two more video's he's done on the Vega project. You can also see some Duramold stuff in this video about my airplane. The first half has the Duramold and airframe construction, while the second half is engine build and some flight fild.
  7. C

    Mo(u)lded plywood construction?

    Here's a video on how a friend of mine did the skins for Kermit's Vega...
  8. C

    Solder Splice Connectors

    Everything in military aircraft was solder type connections until the F-22. Even it and F-35 use some solder connections. Properly done, per the specifications and engineering, the failure rate of a solder connection is extremely low.
  9. C

    Substitute phenolic with delrin?

    Depends on how the phenolic part is designed. Under load, delrin can creep.
  10. C

    Airplane plans inventory

    If the drawings are full size, they have some value. The seqair site has everything else available for free download.
  11. C

    Cut down my trees or not?

    Bandsawbladesdirect is where I get my blades. Spec the tooth count, pattern and blade length and it's on my doorstep in a couple of days.
  12. C

    Cut down my trees or not?

    Actually, Keven K., the guy doing the restoration for Kermit, bought a log of specific length and had it rotary veneered. The Vega skins were then build up on a mold Kevin built, using those veneer sections. The decision was made to do the entire log, so as to not run the risk of running out of...
  13. C

    how to locate each holes positions relative to the center of engine shaft?

    We used to make quick and dirty hole templates with plexiglass to do repairs. Tape in place and then use a sharp scribe to mark the hole centers. If high accuracy was needed, two holes would be oversized and then we would glue drill bushings in place with guide pins into the structure. About 2...
  14. C

    First applications of composite material in home built or GA aircraft

    This video has some good views on how DuraMold was done. It's about 27 minutes and covers production of the AT.
  15. C

    Aircraft Movers

    I helped move a B-58 from Carswell to Meacham and back long years ago. Our cost was pretty low, as the tow tractor and some of the support was USAF active duty and reserve personnel. I ran a crew dropping and reinstalling signs on both moves.
  16. C

    Just posting this & moving along Officer

    Stalls like a Mark 17 SuperRock........
  17. C

    Aircraft Movers

    Looking at current independent operators, rates run 2-5$ a mile for normal stuff and approaching 12$ a mile for outsized stuff, including loads that need permits and escorts..
  18. C

    Any AMEs on here?

    Pop over to the POA board and get either DrLou’s or DrChen’s contact info and spend the $ for a consultation. Both are AME’s that deal almost exclusively with difficult cases. I believe that both do email and phone consults. Fair warning, neither tolerate bs or willful omissions of information.
  19. C

    Aircraft Movers

    I actually got pulled over for being an unusual load and catching the commercial enforcement guy's attention. I was exactly 3" over width, with a piece of sheet metal that was 11 feet off the ground and about a foot long. It took 30 minutes with a tape measure for him to determine that. There...
  20. C

    Just posting this & moving along Officer

    Only if the Cushman was a lobster model..... :)
Top