Absolute amazing tool - it will revolutionize what can be achieved - thanks for the heads up Aluminum
All it needs now is a Z axis !
Why not something like the Mead Adventure ?
I have done some preliminary sketches and calcs and instead of joining the spars with plates they...
Trying to start to understand XFLR5
I have downloaded the latest version V6.09.01 Beta
I searched the Homebuilt data base - not too much in the...
Dean , Scott's brother is rebuilding the Opal
It looks like it will fly again but needs some assistance
Attached find the latest article from...
Scale Lockspeiser ? ( Lockspieser Lite ? )
It would just about fit into a 20 ft container but the canard tips would have to be...
What about a slightly smaller version of the Lockspeicer LDA
The original one had an 85 HP engine and it had a rag and tube fuselage
I did the testing . No connection at all . Not one foam sample given to me or any discount . The only foam sample i got was from another builder...
I wish i had seen this before !
Built the first one and it flew straight out
Thanks for sharing
What about the Colab wing concept applied to the Onyx ( flying flea )
It seems that placing the canard quite a bit higher has some interesting...
What about Claude Piel's Onyx ?
The canard is all flying ( from Flying Flea ) but the stall system is very different to Rutan's Varieze etc
For winglets look to the Varieze/Longeze designs - lots of working examples there - even the swift had to eventually put rudders on the tips to...
Here are some details of the millenium glider
What about a homebuilt Millenium ?
Only moulds for the D-tubes that could be built as a group so the costs shared
The rest of the structure is...
Mike in his video's goes through his aircraft after he had an engine failure and forced landing
The damage was very small and the airframe itself...
Check out Mark langford's fuel system ( + 1000 hrs operation )
Mark Langford's fuel system (n56ml.com/fuel/index )
One of the best around and...
Thanks for all the help
Its a weird one ?
The only website i am having a problem with ?
I am working through it with my provider and trying to...
:ermm:Anybody able to "see " the website - it seems not to respond from within Australia ?
The problem seems to have started in Aug
I have done quite a bit of testing on foam cores and the attached PDF is an update of some previous testing i did ( i have done 64 samples ).
Mini Sniffer photo - amazing
Congratulations on building and flying it !
Good history - when somebody writes a definative Varieze story your project and the...
Separate names with a comma.