CdnMedic
Well-Known Member
I'm hopefully finally going to get my build table for my Sonera II built in the next couple weeks.
I unfortunately don't have a large orange type store close by, so my selection of build table tops is limited.
I can get sheets of 3/4" melanine topped particle board or 3/4" MDF.
It's important to note that I will have to use a torch to bend the longerons on the table surface.
My main frame on the table will be 16' long pieces of 11/16" thick, 7-1/2" wide primed MDF so I have a milled straight continuous surface to attach the top to.
I unfortunately don't have a large orange type store close by, so my selection of build table tops is limited.
I can get sheets of 3/4" melanine topped particle board or 3/4" MDF.
It's important to note that I will have to use a torch to bend the longerons on the table surface.
My main frame on the table will be 16' long pieces of 11/16" thick, 7-1/2" wide primed MDF so I have a milled straight continuous surface to attach the top to.
