JDub
Well-Known Member
I have a Midget Mustang Project with the fuselage bones completed and the wings ready to close along with the plans. The dihedral is set, but the wing attach points still need the final ream to fit the bolts. Bolts are included. There is kit support from Mustang Aero. This particular one is to the plans. I paid $3200 for the project. I'd do $2500 if it goes with the engine below.
O-320 A2B conical. This is a first run engine with all accessories. The cylinders don't have too many hours. When I get home in a couple of days, I'll update and post pics. It will be sold as a core. $5500.
This is a good start to a plane that will go like stink. Life has changed my direction and my Cassutt will have to suffice for a while
Both are stored in our dry climate at Richland, WA.
Jerry
5ohniner-7i3-three2niner1
O-320 A2B conical. This is a first run engine with all accessories. The cylinders don't have too many hours. When I get home in a couple of days, I'll update and post pics. It will be sold as a core. $5500.
This is a good start to a plane that will go like stink. Life has changed my direction and my Cassutt will have to suffice for a while
Both are stored in our dry climate at Richland, WA.Jerry
5ohniner-7i3-three2niner1
