• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Composite fuel tank question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cluttonfred

Well-Known Member
Supporting Member
Joined
Feb 13, 2010
Messages
10,723
Location
World traveler
The Volksplanes use a composite fuel tank/forward fuselage decking originally designed for polyester resin and ordinary marine fiberglass cloth ("Alsynite" sheet still exists but now appears to be a fiberglass roofing manufacturer in Asia.) Here's the page from the now almost 50-year-old VP-2 plans:
17.jpg

Composite gurus, with what we know today about various resins and how they react with gasoline (including automotive fuel with potential alcohol content) what would be the best resin and fabric for this type of fuel tank today?

Bonus points if there is also a compatible sheet material readily available to use for the baffles and tank ends instead of making your own.

If the best answer is "just use polyester resin and ordinary fiberglass and slosh the tank with sealant" then that's fine, too.

If you're answer is, "Never mind composites, do it in aluminum and pop rivets," then we've already had a thread on that. ;-)

Thanks!
 
Back
Top