Recent content by wilga12

HomeBuiltAirplanes.com

Help Support HomeBuiltAirplanes.com:

  1. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    I did sell these guys......About two months ago.. I'm real sorry that I forgot to return to this forum to clear the board...My appologies... Dave Red.. / wilga12
  2. W

    The VW diesels

    Thanks very much for tossing that info on the pile,...Keith It's really interesting just what can be achieved when some very capable folks put their heads together... Now if we could just come up with a lil baby diesel (40 Horses) that would lend itself to the ultra-lite scene as did the...
  3. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    OK,... bmcj,... Best of luck on your project..! And Thanks for reading my ad.........dr..
  4. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    Yes,...They are capable of more,...There are higher Compression ratio pistons available.. These are in addition to the info above,... about swapping O-470 and O-520 jugs. I forgot to mention that I have the name and PH# of two different outfits,here in the states that specialize in these...
  5. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    Does anybody have an accurate figure of what an O-320 Lycoming weights...?? These may be on the heavy side..?? I'm not sure. One thing I am sure of is,... it's just a matter of balance,...Just look at the GB's,... the old time racing planes...A tiny plane,one pilot and a big ole P and W...
  6. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    Yeah BMCJ,...... My best guess is 320 lbs give or take 20 lbs. The uncertainty comes from the scale that I have for use,... I'm not totally sold on it's supreme accuracy... Thanks,................. Dave..
  7. W

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap.!!

    4 Cylinder Continental GPU's,..Two of them..And Pretty Cheap,...NOW WITH PICTURES..! Hi folks,... ..Yes,...... I DO HAVE more PICS to send to your e-mail address. These are commonly called PE-90's.110 HP at 2600 RPM.These are 314 Cu.In. These are the lil brother of the six cylinder...
  8. W

    StarLite TRI-GEAR wanted!!!!!!!

    I'm in search of a conventional gear "Starlite" project or wreck or what have you,...with or without motor... Thanks much ,...................Dave..
  9. W

    The VW diesels

    The VW diesels Thankyou so much Dustin, the information available at that site, and it's links is totally GREAT...........Well Done !! Thanks to all who reply.........................Dave
  10. W

    The VW diesels

    Hi All Does anyone have any information on some one using either of the two in-line 4 cyl water cooled diesels that VW puts in their "New Beetle" or the "Passat" in a plane, heli or even a swamp boat ?? I'm all ears, What you folks got ?? Thanks to all who...
  11. W

    RADIAL ENGINE

    Thanks for the post, CAP A Kinner is one I haven't thought of in quite some time, How do you figure the "Parts" availability to be? You should have a good idea depending on just how long ago the overhaul was done ?? The fuselage situation that I was going to use just kinda fell through...
  12. W

    looking to find

    No, I haven't started welding up tubing yet. Ok, Thanks.................I'll check it out. ...........................Later,................Dave :p:
  13. W

    looking to find

    I guess the easiest way to describe the project would be to call it a 120% Supercub It's a Taildragger, with a 2000 lb gross, 220 to 300 hp Radial engine if I can find one, And 2 to 3 seats depending on how wide the 2nd and third persons are. Stick control, Tandem seating A Big people...
  14. W

    looking to find

    Hi guys/gals I did place a post in the wanted area , but thought that some of you sitting around the "Fire place" here in Hangar Flying might not see it. I'm looking to find a Radial engine, priced really right, for a proposed hombuilt Any leads anyone?? Thanks so much for...
  15. W

    RADIAL ENGINE

    Hi all , Thanks to all who responded I'm now past the point that I need a radial engine any longer................Dave Brand new to your site, looks like a "Going" concern. I need to find a Radial engine (close to complete) for a proposed hombuilt. Some examples would be: The 220...
Top