Quantcast

Recent content by SVSUSteve

HomeBuiltAirplanes.com

Help Support HomeBuiltAirplanes.com:

  1. SVSUSteve

    Collaboration?

    One of the professors I know (and asked to help before his department told him that he could not) commented that he was very surprised to learn about my disability. It's not something I exactly mention to most people. It has always been a sore spot for me ever since my second grade teacher...
  2. SVSUSteve

    Is wearing a personal chute with a bail-out system acceptably safe compared to an airframe chute?

    Well aware. I was simply pointing out that the landing gear not the only attenuating mechanism and honestly, as someone (RiggerRob?) pointed out, they are effectively a secondary mechanism due to the normal nose low attitude associated with ground contact.
  3. SVSUSteve

    Collaboration?

    The funny thing is my wife is an attorney and would have been the one handling the review of any waiver on my end....talk about a very defensible document in court should something happen. But whatever....it is what is it.
  4. SVSUSteve

    Collaboration?

    I mentioned that idea to one of the local engineering departments and they declined as they perceived the potential liability (with or without the waivers I suggested) as being too great.
  5. SVSUSteve

    Collaboration?

    Despite being an EAA member myself, I have had zero luck with getting hold of anyone at the local chapters for any reason. The FBO manager I talked to at one of the local airports said that the two he is aware of within driving distance are not "active" to use his description.
  6. SVSUSteve

    Collaboration?

    I think I asked this once before but the project was shelved before it went anywhere due to other things coming up on my end that took precedence. I am getting to a point where I have more free time to get back to working on a design but the same issue creeps up. Those of you who have spoken...
  7. SVSUSteve

    Is wearing a personal chute with a bail-out system acceptably safe compared to an airframe chute?

    The landing gear is only part of the way the Cirrus manages those impact forces. Admittedly, the Cirrus models have a lot of room for improvement but is still better at managing vertical impact loads than about 95% of GA aircraft. The seats have an energy absorbing module for example. It's...
  8. SVSUSteve

    Shoulder Belts on a Baby Ace

    Noted. I was just thinking about reducing the tendency of the "point" to dig in rather than the transmission of the load into the rest of the frame. I looked at that and just thought of it as akin to the point on a Danforth anchor when it contacts mud or other soft soil.
  9. SVSUSteve

    Is wearing a personal chute with a bail-out system acceptably safe compared to an airframe chute?

    Those of you who know me, know that I am an advocate of being prepared for any contingency but even I have to say: the odds of that are pretty minimal. I can count the number of fatal in-flight fires I am aware in general aviation aircraft of on both hands. Aside from the weight issue, there...
  10. SVSUSteve

    Shoulder Belts on a Baby Ace

    As a side note, I would go with a "roll bar" type cross tube that is flatter on top rather than the 'A' shape in the drawing. Think of it as an inverted 'U'. That provides a bit more area for the forces to be spread out if/when the aircraft flips over. It's less likely to dig in and thus...
  11. SVSUSteve

    Preparing to build a TBD

    Into and out of Class C? This isn't Old Mudsuck International in the 1950s. Let's not discourage people from basic safety equipment that allows one to see and, more importantly, be seen by other traffic.
  12. SVSUSteve

    Preparing to build a TBD

    Glad I am not the only one disappointed to learn that he isn't.
  13. SVSUSteve

    Landing gear loads?

    If anyone needs anything more out of the Pazmany landing gear book, let me know, I have the forum's reference copy. Sorry for the delay in replying...we have been swamped at work the past few months.
  14. SVSUSteve

    Landing gear loads?

    If anyone needs something specific out of it, let me know. I have a copy.
  15. SVSUSteve

    Tube construction: Alternatives to conventional welding

    Two things: 1) That's my point in asking "show me a practical example". 2) There's a reason why they aren't. Either you end up with a heavier structure to account for the downsides of the material in question (or the limits of the designer's knowledge) or you have to have so much volume (or...
Top