PiperCruisin's latest activity
Help Support Homebuilt Aircraft & Kit Plane Forum:
-
Answering your question, Yes. It has probably already crossed your path a few times and you just did not recognize it. The preparation... -
Glasair(I, II and III) single peace wing don't need large bolts to hold those bending(shear) loading and it's mounted to fuselage with...
-
PiperCruisin replied to the thread rear spar bending load.Nice photos of the joints. I just want to point out, being Captain Obvious here, that the "large bolts for the shear loads" is because...
-
-
Lancair Legacy 3 peace wing attachments - front spar with two bolts and rear spar with one bolt:
-
PiperCruisin replied to the thread rear spar bending load.Yes, I understand that. How is it attached?
-
PiperCruisin replied to the thread rear spar bending load.Cherokee does not, unfortunately. Have to play with the flaps. Anyone have a picture or sketch of how the Mooney wings attach? I...
-
The Glasair III wing is done the same way as the other Glasairs. The upper wing skin is cut out between the front and rear spars to...
-
Reading the above closely, you did not say if you were talking about a one piece wing, a two piece wing or a three-piece wing. And it...
-
Cable mixer.
-
PiperCruisin reacted to John.Roo's post in the thread What do you think about "e-soaring"? with
Like.
Pods on the top of wings? Also one of possible ways..... -
PiperCruisin replied to the thread What do you think about "e-soaring"?.Just out of curiosity, what was hard about it? I'm guessing there is a lot of failure points and math for the test apparatus, that was...
-
PiperCruisin reacted to John.Roo's post in the thread What do you think about "e-soaring"? with Like.
Right - Sunseeker Duo is really able to sustain flight without using battery power. And that is a "holy grail" of e-soaring ;) But as I...
-
PiperCruisin reacted to John.Roo's post in the thread What do you think about "e-soaring"? with Like.
Yes, I like this project a lot 👍 Eric is great visionary since beginning. Even first projects Sunseeker, Sunseeker 2 etc. are very nice...
-
PiperCruisin reacted to billyvray's post in the thread Starck AS.37 - one engine, two propellers with Like.
In a similar vein, the FK-11 used two props powered via two belts and a single engine. I think this config would work, but agree that...
-
PiperCruisin replied to the thread Starck AS.37 - one engine, two propellers.True and evident. However, as in a lot of twin engine applications, if you lose one you might be better off just shutting...
