Magisterol's latest activity

Homebuilt Aircraft & Kit Plane Forum

Help Support Homebuilt Aircraft & Kit Plane Forum:

  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    That is how you call it. Thank you. That is helpful and precise. Everything else would get the job done close enough. Thanks again.
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    Now that I figured out to attach the spars in the middle, how to build a leading edge with a variable radius along the span?
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    i think you might be right. Looks flat at the top inside the fuselage. Maybe it is only the bottom spar cap that is made of 2 parts...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    That is what I was looking in the photos, magnifying them as much as possible, but the become very pixelated.
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    Well, it could have been built as a one piece, but being made of metal, unless it was poured hot, it had to be assembled at the middle...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    That is whaa I thought too. It is made out of four panels. The middle two are ”more permanently “ attached togheter, while the outer two...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    For me a kink is a sharp bent. I was talking about the top and bottom of the wing where they meets in the centre of the airplane. If...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    From what I heard he was a very good pilot. I guess he build the airplane for his own skills. I don’t think it was intended for “safety”...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    It is Russ’ airplane. I bought it last year, few month before he passed away. I like it, but he didn’t fly it much before I bought it...
  • Magisterol
    Magisterol replied to the thread Crosby CR-4.
    Yes. From the web
  • Magisterol
    Hello. Anybody by any chance has a drawing of the CR-4 wing construction? I have seen some pics and looks like the wing is made out of 3...
  • Magisterol
    Magisterol replied to the thread VSI shows descend in flight.
    I took the autocorrect off, but looks like, for what reason, it is back on.
  • Magisterol
    Magisterol replied to the thread VSI shows descend in flight.
    I was thinking at what are you saying, but when I test it with the syringe, it works normal. It shows climb and if I stop the plunger...
  • Magisterol
    Magisterol replied to the thread VSI shows descend in flight.
    It is syringe. My bad.
  • Magisterol
    Magisterol replied to the thread VSI shows descend in flight.
    I just took the lines attached to the static and pitot side and the lines were ovalized. So I am think it was leaking through there. I...
Top