Help Support HomeBuiltAirplanes Forum by donating:

herbrose
Last Activity:
Mar 5, 2014
Joined:
Jul 11, 2007
Messages:
30
Likes Received:
0
Media:
35
Location:
Sacramento PA

Share This Page

herbrose

Active Member, from Sacramento PA

herbrose was last seen:
Mar 5, 2014
    1. tsoyourou2
      tsoyourou2
      seiko sarb059 I became in search of this item for months and lastly found it at nnluxury.com This unique store will be the largest around the world, contains in excess of 10,000 luxury items. I thought if you are looking for lovely handbags or watches, it is best to really get a load of the usb ports.
    2. herbrose
      herbrose
      Good Morning:

      I used 8/32 nut plates on the wheel pants, for attaching the lower cuff to the wheel pant. 8/32 nut plates were also used on the lower part of the wing at the access panel for the upper cuff. A single 10/32 bolt was used on the outboard side of the wheel pant which went through a 3/4 in alum. spacer from the end of the axle to the inboard side of the wheel pant, and the mounting bracket for the wheel pants in board side at the landing gear, I used 4-8/32 nut plates installed on the mounting braket.

      You're welcome to contact me directly at hdr0614@hotmail.com thus, affording the ability to send several pictures directly to you on the installation.

      While it seems overkill, I'm pleased with the results thus far.

      Herb Rose, N657HR Sacramento, PA
    3. catscradle
      catscradle
      Herb, pants and cuffs look really good! Building some myself right now and wondering what the attachement methods for the cuffs to the pant is on yours. ....like the look and was thinking of the pretty much the same. Could you share please the hardware and how?

      Catscradle.....Peoria, IL
  • Loading...
  • Loading...
  • About

    Location:
    Sacramento PA
    Current / Future projects:
    Building a Bob Bushby, Mustang II. Waiting for the wings currently, from MA

    Aircraft finished, and flown now for a total of 52 hours as of 10/20/08; now to get it ready for paint this winter. I'm thinking of a PT-19 scheme with Army Air Corp insignias on the wings and tail cone.

    Aircraft pai
    Past Projects:
    2008 Bob Bushby Mustang II. IO 360, fixed pitch prop by Sensenich, full glass cockpit.
    Love to build things, but most of all really enjoy my new Mustang II!

    Aircraft/flying tail dragger is a blast! Ahh, nut do keep your toes ready:)
  • Loading...
arrow_white