Quantcast

fly2kads's latest activity

HomeBuiltAirplanes.com

Help Support HomeBuiltAirplanes.com:

  • fly2kads
    fly2kads reacted to wsimpso1's post in the thread Prepping plywood for T-88..... with Like Like.
    Since there is so much talk about this, I suppose we should get into what is happening and how it can go wrong... Wood is made up of...
  • fly2kads
    fly2kads replied to the thread Riblett on Twist.
    Just a little light reading, there! Good stuff, though.
  • fly2kads
    fly2kads reacted to mcrae0104's post in the thread Riblett on Twist with Like Like.
    You seem to disagree with the designer of your aircraft. I am not aiming for a spin-proof aircraft, only one with consistent and...
  • fly2kads
    fly2kads replied to the thread Hack RF for ADS-B.
    I don't understand what possess people to think such a thing would be a good idea.
  • fly2kads
    fly2kads replied to the thread Riblett on Twist.
    It's normally not controllable in-flight. Either the rudder is deflected, or the whole vertical fin is offset, to produce a yaw to the...
  • fly2kads
    fly2kads reacted to Pops's post in the thread JMR SPecial project. My design. with Like Like.
    One of the early engine test runs.
  • fly2kads
    fly2kads reacted to peter hudson's post in the thread openvsp to x-plane with Like Like.
    Hi All, I made a video about using OpenVSP's eport to .OBJ as a way to (relatively) quickly get your concept into X-plane to do some...
  • fly2kads
    fly2kads replied to the thread openvsp to x-plane.
    Thanks a bunch, Peter! I have an OpenVSP model that is fairly far along, and I had been wondering how to get it into X-Plane to take it...
  • fly2kads
    fly2kads replied to the thread Riblett on Twist.
    I've been tinkering with this, myself. Fortunately, software and spreadsheets make this a little easier to evaluate, even for an amateur...
  • fly2kads
    fly2kads replied to the thread girodreamer.
    Looks like a fun project! Welcome to the forum!
  • fly2kads
    fly2kads reacted to girodreamer's post in the thread girodreamer with Like Like.
    ok here is it, this is a tandem 246 kg, 122 hp (rotax 912 with the pagotto turbocharged kit) mechanical fuel pump (Flygas) , center of...
  • fly2kads
    fly2kads replied to the thread Building a VW Aero-Engine.
    FWIW, the vendor Pops linked to above, aircooled.net, is one of my go-to sources for VW engine parts. John, the owner, has been at it...
  • fly2kads
    fly2kads reacted to cluttonfred's post in the thread 100% Scale Hawker Typhoon with Like Like.
  • fly2kads
    fly2kads reacted to Pops's post in the thread Jungster 1 & 2 aircraft with Like Like.
    No, I was answering his question at the bottom of post #14 about the rubber pucks for his landing gear. Maybe I should have referenced...
  • fly2kads
    fly2kads reacted to Pops's post in the thread Building a VW Aero-Engine with Like Like.
    Another short video. To find the simple formula for working out the length of the torque extender for the length of your torque wrench...
Top