Quantcast

Recent content by Doran Jaffas

HomeBuiltAirplanes.com

Help Support HomeBuiltAirplanes.com:

  1. Doran Jaffas

    Long term integrity of resorcinol glue

    QUOTE="BrianW, post: 563113, member: 65758"] Monday at 7:19 AM So do some others. BJC I asked Alana yesterday if this was the case. She confirmed it. Brian W On that note...Weldwood Resourcinol glue is the one to use. I did some wood failure tests with Weldwood and Elmer's resourcinol...
  2. Doran Jaffas

    How many airplanes do we need?

    My heart goes out to you for your lack of funds to buy number eight!
  3. Doran Jaffas

    Long term integrity of resorcinol glue

    Yes,,, excellent information.
  4. Doran Jaffas

    Long term integrity of resorcinol glue

    Sorry about the text issues but I hope you get the gist of it.
  5. Doran Jaffas

    Long term integrity of resorcinol glue

    If the mixture was correct and obviously it has been otherwise the airplane would not have stayed in the air as long as it has,, I would not worry about it at all. I've used resource and all when I built propellers and did not have an issue and also resource and all was used in boat building...
  6. Doran Jaffas

    Most Beautiful Aircraft Ever Built

    I vote for the Constellation.
  7. Doran Jaffas

    Aero News Network Video - Terrible Raptor 1st Flight Review

    How about getting a review from somebody that is actually familiar with test flying aircraft. The climb rate was probably kept very shallow for a purpose. as far as the instability goes nobody really knows because nobody else was in the cockpit. The long takeoff roll could have also been done...
  8. Doran Jaffas

    Green zinc chromate primer as final finish

    Coming from experience leaving some of it exposed you'll be surprised at how long it does last. Also coming from experience, make sure you have a positive pressure air mask on when you're spraying it. When I sprayed an airplane long time ago with it I didn't even think about it until after I got...
  9. Doran Jaffas

    What Did You Do To Save General Aviation Today?

    Gorgeous picture. Wx hasn't been good for flying here in Michigan the last couple of weeks. Only had one dawn patrol here in Michigan and that was several weeks ago. Fortunately the wx turned out very nice and a lot of birds flew into Lowell, Michigan after the fog lifted.
  10. Doran Jaffas

    Wrapping Fiberglass around Aluminum t increase strength?

    Time for this thread to stop.
  11. Doran Jaffas

    What did you do on your airplane project today?

    Sorry for the late reply. It must be an illusion of the picture. The cowling slopes a bit but not the engine. On the " What did you do on your airplane today " topic,, I and a friend of mine worked on fitting the new spinner and propeller today. Backing plate, bulkhead, cuts for the prop...
  12. Doran Jaffas

    How Hot Is Too Hot?

    Excellent words of wisdom.
  13. Doran Jaffas

    What did you do on your airplane project today?

    Initial look see. Hope to get the opening for the pilot cooler done this weekend.
  14. Doran Jaffas

    What did you do on your airplane project today?

    More for n...sort of.. After flying last weekend it was discovered that my spinner had cracked. After removing the spinner for further investigation I found the backing plate cracking at the bend of the flange. It appears to have started at one of the nut plates. The crack was obviously...
  15. Doran Jaffas

    Engine options for my Lazair

    Aside from the part of the comment that you did not like he was talking good sense when it comes to getting a good reliable engine from a glider and installing that. I have been around ultralights and I remember the Lazair when I first came out. I believe it was a couple of two-stroke 8...
Top