Help Support Homebuilt Aircraft & Kit Plane Forum:
cdlwingnut
- Messages
- 546
- Reaction score
- 1,191
Latest activity Postings Media About
-
-
Progress is ongoing on my right wing. Ribs have been attached to the main spar using the mini-brads and the result is a tidy and strong... -
cdlwingnut replied to the thread Ragwing RW1 Ultra Piet.I got the cowling in the paint booth, I has 2 coats of primer and a coat of pain on it now. The elevators are attached and wires hooked...
-
-
cdlwingnut replied to the thread Ragwing RW1 Ultra Piet.The wing was primed so I got a coat of yellow sprayed on the top of it. might have a flying airplane someday yet
-
-
Lots of progress being made in August. Tail wires, bending jigs, bushings etc. my goal is to wrap this tail up 100% in August. After a...
-
cdlwingnut replied to the thread Ragwing RW1 Ultra Piet.Sprayed a 2nd coat of primer on the bottom of the wing and brushed the 1st coat of primer on the center wing section.
-
-
I know it's been a while since I've posted to my build log so an update is in order. I assure you that I'm still plugging away at...
-
I have finally finished the first main spar of my wings. I wanted to keep the spliced joints to the bare minimum and have managed to...
-
Limit load test negative and positive loading.....only positive shown 900 lb .....the idea was to stress the cross members in tension...
-
cdlwingnut replied to the thread WW1 wood grading (non spruce).I second
-
There are tables in thing like AC43 and others for airplane use wood.
-
-
Loading…
-
Loading…
-
Loading…
