• Welcome aboard HomebuiltAirplanes.com, your destination for connecting with a thriving community of more than 10,000 active members, all passionate about home-built aviation. Dive into our comprehensive repository of knowledge, exchange technical insights, arrange get-togethers, and trade aircrafts/parts with like-minded enthusiasts. Unearth a wide-ranging collection of general and kit plane aviation subjects, enriched with engaging imagery, in-depth technical manuals, and rare archives.

    For a nominal fee of $99.99/year or $12.99/month, you can immerse yourself in this dynamic community and unparalleled treasure-trove of aviation knowledge.

    Embark on your journey now!

    Click Here to Become a Premium Member and Experience Homebuilt Airplanes to the Fullest!

Bendix king transponder

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sailsail

New Member
Joined
May 20, 2009
Messages
2
Location
United States
Hello all!

I have a kt76A (Bendix King) Transponder that I am wiring up to a Dynon Avionics Blind Encoder Converter that then goes to an Efis-d100. Anyway I am having trouble with the wire placement on the KT76A I have been to all the sites, including http://www.aeroelectric.com/Installation_Data/ and http://www.aeroelectric.com/Installation_Data/KT76A-76C-78A.pdf to get the wiring guide, the problem is the numbering does not match up! Using their convention the bottom of the fitting would be (right to left) A B C D E F G H I J K L and the top would be (right to left again) 1 2 3 4 5 6 7 8 9 10 11 12 (top works out perfectly) but they say it goes to N (top part) what letters do I skip? OR am I even doing this correctly?

Thanks for you help
 
Back
Top