rbrochey
Well-Known Member
The Falconar F 10 is based on the Jodel D 9 but has been changed enough that it can't really be called Jodel. I thought I'd post a few photos before I finish it up, I have some finish sanding to do then apply 1.5 mm Birch ply to the leading edge. I am taking A LOT of photos to show the FAA inspector or EAA technician. Once I finish a little shaping work I'll apply ply and the HIPEC. I am using T-88 mixed by volume, usually 2.5 ml each but will increase the total when I do the ply.. The last photo also shows the jig I built to ensure I keep everything plumb and perfectly centered.