David Teahay
Well-Known Member
Hello there����,pls take a good look at the small dots on the bays of this two-spar wing .my question is, is the drag and anti drag wire as seen in bay 1 supposed to connect to the root of the compression tube or to the intersection between the wing spars and compression tube as seen in bay 2 or,is the drag and anti drag wire supposed to connect to the wing spars as seen in bay 3.
This is the point I'm at in my project,your answer will be much appreciated.
Inorder words,which bay is set up correctly ⬇⬇⬇⬇
https://scontent.flos2-1.fna.fbcdn....=f2fcf1fb566718b723f21987a6c5edaf&oe=5CB6A576
This is the point I'm at in my project,your answer will be much appreciated.
Inorder words,which bay is set up correctly ⬇⬇⬇⬇
https://scontent.flos2-1.fna.fbcdn....=f2fcf1fb566718b723f21987a6c5edaf&oe=5CB6A576
Last edited: