Beragoobruce
Well-Known Member
I needed access to some internal fixings on my MiniMax, & had to cut a 4" circular access hole through the 1.8oz dacron to do so. I won't need to get to these again, so need to re-cover the hole.
I have spare fabric, but no glue. The surface I need to bond to is cured 'latex' (acrylic) paint. Can anyone suggest what type of adhesive i could use to bond a circular patch over the access hole? It's on the underside of the rear fuselage, so not in critical airflow area. And I don't want to buy a big tin of Polyfiber glue, due to high cost of shipping to Australia.
Thanks in advance
Bruce
I have spare fabric, but no glue. The surface I need to bond to is cured 'latex' (acrylic) paint. Can anyone suggest what type of adhesive i could use to bond a circular patch over the access hole? It's on the underside of the rear fuselage, so not in critical airflow area. And I don't want to buy a big tin of Polyfiber glue, due to high cost of shipping to Australia.
Thanks in advance
Bruce