$5,500
PLEASE DON'T PM ME. Just call 925 456 4388 or email direct wpre123 @ yahoo .com
If you're not familiar with this model take a look at the factory website. It's hard to beat the performance of a BD4 for less money.
http://www.bedecorp.com/bd-4c.html
Complete rolling(taildragger) airframe with cowl(top cowl not show in pics). Plane was never registered. Fuselage, wings and tail are all built. Needs paint, engine, engine mount, lighting and panel to be completed. Panel is partially complete with six pack steam gauges some of which may need to be serviced. No radios or nav. equip. Panel also has basic engine, fuel and electrical monitoring gauges and switches mounted in.
Also included with the plane are a set of wing extensions. You can add about 2.5 feet(or less) to each wing with these. Lower your stall and landing speed. I have a brand new high quality stainless steel exhaust system that would mount to a Lycoming O-360 or possible an O-320 and is designed for a BD-4. This could be included at an extra cost.
[FONT=&]Here is a pretty good walk
[/FONT]
[FONT=&]around video of all the parts I have included with this plane
[/FONT]
[FONT=&]with the only correction being I don't have the curved
[/FONT]
[FONT=&]windshield any more. I've heard the flat
[/FONT]
[FONT=&]windshield with Bede's upgraded side windshield supports
[/FONT]
[FONT=&]is a decent aerodynamic improvement. A flat piece of
[/FONT]
[FONT=&]plastic from a plastic shop is pretty cheap....probably
[/FONT]
[FONT=&]between $80 and $100. Feel free to skip my
[/FONT]
[FONT=&]motivational speech in the beginning
[/FONT]
[FONT=&]=). https://www.youtube.com/watch?v=-t2h6F7givE&t=196s
[/FONT]
[FONT=&]A video showing the included wings(that have had the wing tank section reskinned in aluminum) installed on the
[/FONT]
[FONT=&]airframe. https://youtu.be/-e0jyxnI0N8?t=1m27s
[/FONT][FONT=&][/FONT]
I'm selling because I found another plane I'm interested in buying.
FREE Delivery. If you live within about 100 miles from Livermore, CA
Sorry about the upside down pics! Can we edit / rotate pics. on this website?
$5,500
PLEASE DON'T PM ME. Just call 925 456 4388 or email direct wpre123 @ yahoo .com
If you're not familiar with this model take a look at the factory website. It's hard to beat the performance of a BD4 for less money.
http://www.bedecorp.com/bd-4c.html
Complete rolling(taildragger) airframe with cowl(top cowl not show in pics). Plane was never registered. Fuselage, wings and tail are all built. Needs paint, engine, engine mount, lighting and panel to be completed. Panel is partially complete with six pack steam gauges some of which may need to be serviced. No radios or nav. equip. Panel also has basic engine, fuel and electrical monitoring gauges and switches mounted in.
Also included with the plane are a set of wing extensions. You can add about 2.5 feet(or less) to each wing with these. Lower your stall and landing speed. I have a brand new high quality stainless steel exhaust system that would mount to a Lycoming O-360 or possible an O-320 and is designed for a BD-4. This could be included at an extra cost.
[FONT=&]Here is a pretty good walk
[/FONT]
[FONT=&]around video of all the parts I have included with this plane
[/FONT]
[FONT=&]with the only correction being I don't have the curved
[/FONT]
[FONT=&]windshield any more. I've heard the flat
[/FONT]
[FONT=&]windshield with Bede's upgraded side windshield supports
[/FONT]
[FONT=&]is a decent aerodynamic improvement. A flat piece of
[/FONT]
[FONT=&]plastic from a plastic shop is pretty cheap....probably
[/FONT]
[FONT=&]between $80 and $100. Feel free to skip my
[/FONT]
[FONT=&]motivational speech in the beginning
[/FONT]
[FONT=&]=). https://www.youtube.com/watch?v=-t2h6F7givE&t=196s
[/FONT]
[FONT=&]A video showing the included wings(that have had the wing tank section reskinned in aluminum) installed on the
[/FONT]
[FONT=&]airframe. https://youtu.be/-e0jyxnI0N8?t=1m27s
[/FONT][FONT=&][/FONT]
I'm selling because I found another plane I'm interested in buying.
FREE Delivery. If you live within about 100 miles from Livermore, CA
Sorry about the upside down pics! Can we edit / rotate pics. on this website?
$5,500