planecrazzzy
Well-Known Member
- Joined
- Aug 16, 2003
- Messages
- 330
Hey Guys,
The more I think about it , My Rib Jig is more of a "tool"
Most Jigs... That's it , one trick pony...
Mine was made by drilling 3/16" holes.... and hammering 3/16" Stainless round stock...
When my ribs were done... instead of making another rib jig...
I tapped the pegs I didn't need , and re positioned the front pegs to form
the smaller "Root Ribs"
.
. Here's some Pictures of the Jig...
.
. Gotta Fly...
.
.PS I screwed up one hole... I glued some toothpicks , and pounded them in the hole
re drilled the hole
The more I think about it , My Rib Jig is more of a "tool"
Most Jigs... That's it , one trick pony...
Mine was made by drilling 3/16" holes.... and hammering 3/16" Stainless round stock...
When my ribs were done... instead of making another rib jig...
I tapped the pegs I didn't need , and re positioned the front pegs to form
the smaller "Root Ribs"
.
. Here's some Pictures of the Jig...
.
. Gotta Fly...
.
.PS I screwed up one hole... I glued some toothpicks , and pounded them in the hole
re drilled the hole