greentowtruck
Member
Hi all I am starting a Durand MK V it is a 2 place all metal cabin biplane with a reverse (negative) stagger to the wings, full span flaps on both wings with spoilers for roll control on the lower wing. Also has a stabilator horizontal with full width trim tabs. I bought this project from a local EAA member who could not finish it. He already had all the wing ribs cut and flanges formed, most of the vertical stab and rudder parts formed and some of the rear fuselage/ horizontal/ vertical stab mounting parts formed. Also have most of the wing main spars. I will have alot of questions but will be posting more in the sheet metal forum