Wood production is very slow - handmade. Therefore it is necessary to wait for several months.
The price - 2.75$ 1 sm
I think you need to list the diameter and propellor pitch before anybody could buy it..
Understanding Propeller Pitch | Boating Magazine
For example, 54" x 32". It measures 54 inches from tip to tip and if it were a perfect screw goes forward 32 inches for one single rotation.
Europae (Europa) probably uses a similar method but metric instead...
Okay to list price in Euros, everybody can convert... :-)
CHOPPERGIRL@AIR-WAR.ORG ~ Dorothy ~ Alice ~ Flying with Christina ~ Unchained Melody ~ Titanium ~ Follow Me ~ Facebook ~ Shenanigans
My Six Swords of Freedom: disobedience defiance resistance revolution sedition & sabotage
Disobedience is the true foundation of liberty. By definition, those that obey, must be slaves.
We design each individual propeller for a particular customer and operating conditions. The price is about.
Wooden propeller production resumed.
Price is determined individually depending on the material, method of protection, engine power.
The base price - $7 per 1" diameter propeller.
This propeller went to France.
The diameter of the small 1700 mm. Power 160 hp Speed - 232 km/h.
Conventional airfoils are not reached. At low speeds - stall, the low thrust noise. Designed specifically airfoil based on NASA-44. Now everything should be fine - high thrust at the start, a high thrust at speed.
In the first moobschenii - our propeller on an airplane Skyranger with the engine VW.
Now we produce several propellers made of oak. One propeller will travel to France to Jabiru, the other propeller will travel to the US for O-320.
What other types of planes have your props gone on?
I find it difficult to enumerate all. We are making wooden propellers for a long time, since the early 90s.
This propeller is already being tested in France at the Jabiru engine.
This propeller went to the United States. It is designed for the O-320.
Good looking. Is it coated or is it meant to be painted? Are the prop bolt holes finished? What is the size and pitch and what plane is it for?