No More Results

2 Visitor Messages

  1. Thanks for the encouragement.
  2. View Conversation
    Message from kenkad:
    you might want to consider small pneumatic cylinders operating at 125psi, cross coupled so they are not spring loaded. Small air tank (1 gallon or so) with a 12VDC compressor to maintain air supply. I use this in combination with light oil hydraulics (spring loaded air cylinder driving a hydraulic cylinder) for the disk brakes on the vehicle I had posted some time ago in the air and ground mobile thread. if you are interested, i can send you a JPG of the manifold/PCB/valving that is used for pneumatic steering on that vehicle I showed. You could do something similar for flight controls because that was what we would be doing on a joined wing version of that vehicle. All positional sensing is done with magnetic sensors as feedback to the joystick controls/control panel. You would need to send me a private email to kadrmas@hiwaay.net because I will not post any more of this work on the HBA forum.
Showing Visitor Messages 1 to 2 of 2
About Aviator168

Basic Information

About Aviator168
About Me:
interested in aviation
Current / Future projects:
None
Past Projects:
None
My Aviation Interests:
small aircrafts, jet engines
Location (city, state / Country):
Brookville, NY. USA

Statistics


Total Posts
Total Posts
2,117
Posts Per Day
1.31
Visitor Messages
Total Messages
2
Most Recent Message
June 27th, 2013 10:20 PM
General Information
Last Activity
February 19th, 2017 12:30 AM
Join Date
September 21st, 2012

February 11th, 2017


February 5th, 2017


January 31st, 2017


January 24th, 2017